Collaborative Classroom with Interactive Display

Getting Started

  • To wake the screen, tap the Cisco touch panel located on the wall near the podium.

Using the Classroom PC

  • On the touch panel, tap Share located under Classroom PC.

Using a Laptop (HDMI)

  • Plug proper display cable, located on the podium, into your laptop.
  • On the touch panel, tap Share.

Audio Settings

If the audio isn't projecting through the classroom, ensure the proper output is selected and the volume is adequate.

  • Click the sound icon, located in the bottom right corner of the computer screen.
  • In the Select playback device menu, the Codec option should be selected.
  • The volume can be adjusted from the computer or the Cisco touch panel.

Interactive Whiteboard

  • On the interactive SMART display panel, tap the Input button and select the desired display source.

Powering Down

  • To stop sharing:
    • On the Cisco touch panel, tap Share.
    • Tap Stop Sharing.
  • To power down:
    • Select the room name located in the top left corner of the screen.
    • Select Standby.
    • Press the Standby button on the Interactive Display panel twice.


  • Digital Whiteboard will not power on and power light isn’t lit:
    • Ensure the power cable is plugged into a working power outlet.
  • Displays are not turning on:
    • On the Cisco touch panel, tap the room name located in the top left corner.
    • Tap Settings.
    • Tap Restart.
  • Adjusting the display volume:
    • On the Cisco touch panel, press and hold the left Volume button to decrease and the right button to increase the volume.
  • Restart the computer if there are additional issues.
  • If further assistance is needed, contact the Help Desk at 910.521.6260 or
Cisco Touch